ReadySeal PD - Benefits:
- Easy to use
- Prepacked repair mortar-only addition of water is required
- Dense & cohesive mortar will not allow water penetration
- It is an expanding cementations mortar which will ensure the perfect bond on both the sides of the cracks
- Gives high strength
- Non-metallic & chloride free
Product: READYSEAL is an easy to use, high strength, crack repair mortar, which ensures perfect filling of cracks and will not allow water penetration.
Application:
Surface Preparation: Chip out the crack in ‘V’ groove & clean all the debris & loose particles and prevent the surface. The prepared surface should be free from oil, grease, etc.
Mixing: Mix 700ml of water with 5Kg of READYSEAL will give you mortar consistency & fill up the READYSEAL mortar into the cracks.
Curing: Initial curing should be started after 2 hours and continue up to 3 days alternatively.
Primer: Normally primer is not required for READYSEAL, but for exceptionally porous surface READYPATCH PRIMER-(A polymer based primer) is recommended for better bond.
Packing: 5 Kg in sealed polythene packs.
Coverage: 5Kg READYSEAL will give the yield of 2.5 ltrs which will approximately cover 2-3 cracks having the width & depth of 15mm- 10mm.
Storage: At least 6 months in original sealed container in dry conditions.
Health & safety: READYSEAL is non-toxic; however splashes on the skin should be washed well with water. |
